For every area of application
The product forms available are bars, wires, profiles, strips, plates and tubes.
The materials for implants and medical instruments: martensitic and austenitic qualities, Co base alloys and titanium/titanium alloys. This means we stock one of the widest assortments in the world for you at our Service Center.
product forms
| Dimensions range: |
0.039 - 3.937 inch |
| Qualities: |
drawn, peeled, ground, polished |
| Bar end: |
chamfered, pointed, centered, cut to length |
| Conditions: |
annealed, strain-hardened, stress-relieved |
| Straightness: |
0.020 inch, down to 0.008 inch on request |
| Roughness: |
up tp Ra < 0.3 Gm |
| Tolerance: |
ISO 286-2 in tolerances ISO h11 to ISO h05 |
| Additional tests: |
intehral crack detection technology, US inspection identity check |
| Additional services: |
Bar marking |
| Dimensions range: |
0.004 – 0.906 inch |
| Qualities: |
polished, bright |
| Tolerance: |
ISO 286-2 in tolerances ISO h11 to ISO h05 |
| Additional tests: |
(integral) crack detection technology |
| Delivery form: |
in coils and on spool |
| Additional services: |
from 0.004 – 0.059 inch, also straightened and cut to length (bar lengths: 0.236 – 118.110 inch) |
| Dimensions range: |
0.012 x 0.016 inch – 2.362 x 0.394 inch / 1.181 x 1.181 inch |
| Qualities: |
rolled, drawn |
| Surfaces: |
bright, e-polished |
| Form: |
square profile, hexagonal, octagonal and ½, ⅓ and ¼ tube |
| "near net shape" |
precision profile according to your drawing |
| Thicknesses: |
from 0.001 – 0.134 inch |
| Widths: |
up to 41.969 inch |
| Sheets: |
0.020 – 3.937 inch |
| Conditions: |
cold worked, fully annealed, hardened |
| Additional services: |
water jet cut blanks |
| Qualities: |
thin-walled, seamless, drawn, ground |
| Outer diameter: |
0.157 - 0.787 inch |
| Inner diameter: |
0.020 - 0.591 inch |
